| PROTOTYPE PHOTOS | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| [ PROTOTYPE PHOTOS HOME ] -> [ PASSENGER COACHES ] -> [ JCS ] | ||||||||||
| JCS COMPOSITE SLEEPING CAR WITH LAVATORY There were 5 JCSs constructed in four batches Batch 1 consisted of numbers 1005 and 1176, batch 2 consisted of 1006, batch 3 consisted of 1007 and batch 4 consisted of 1052. JCS1007 was built to sleep 10 1st Class passengers and 6 2nd Class passengers. 1007 had a tare weight of 27.6 tonnes and was 16890mm over buffers and 16000mm over body. Both JCS1005 and 1176 were built to sleep 15 1st Class passengers and 6 2nd Class passengers. They had an average tare weight of 27.6 tonnes and an overall length 16890mm over buffers and 16000mm over body. | ||||||||||
JCS 1007 2002-12-15 001 | JCS 1176 2002-12-15 001 | |||||||||
This site is designed specifically to bring as much information as possible to you about various rollingstock and locomotives of the Queensland Railways. If you have any particular loco or wagon you require information for, please e-mail us, and we will endeavour to find the information and post it on this site as quickly as possible. If you have any information or photographs you wish to contribute, please e-mail it through to us and we will post it on the site with full credits given. We will endeavour to research all information thoroughly, to make certain there are no mistakes. Wuiske Models does not accept any responsibility for mistakes or omissions on this site, and publishes all information and photographs on the belief it is true and lawful.
Please note that the photos included in these pages have been reproduced at full size to allow the most clarity for modelling purposes. They may take a little while to open.